Cerawil Ceramic Fiber Tape with SS Wire
Cerawil Ceramic Fiber Tape reinforced with SS Wire, with a density of 500 kg/m³ and maximum temperature of 1260°C. Available in 2 or 3 mm thicknesses, 50 mm width, and 30 m length.
Product description
Cerawil Ceramic Fiber Tape reinforced with SS Wire, with a density of 500 kg/m³ and maximum temperature of 1260°C. Available in 2 or 3 mm thicknesses, 50 mm width, and 30 m length.
Product selection and use guide
Cerawil Ceramic Fiber Tape with SS Wire belongs to the ceramic fibre range; its board, blanket, paper or textile form determines how it is used. Ceramic tape is a textile strip, not adhesive sealing tape.
How to choose
Match form, thickness, density where relevant, reinforcement and binder to the lining detail. Request service-temperature data for the exact type rather than copying another brand rating. Match strip width, thickness and reinforcement to wrapping or joint details.
Applications to consider
Consider thermal lining, gasket or equipment wrapping details as appropriate to the form and design.
Use limitations
Classification temperature is not automatically continuous service temperature. Follow fibre safety, retention and surface protection instructions; this material alone is not a complete firestop system.
Pre-order checklist
- Include drawings, operating conditions and exact type.
- Confirm thickness, form, reinforcement needs and handling and cutting instructions.
- Calculate wrap length including overlap and fastening method.
Frequently asked questions
Do all ceramic fibres have the same service limits?
No. Composition, form, reinforcement and binder may differ; use the selected type data sheet.
Is classification temperature the continuous service temperature?
Do not equate them. Request service recommendations for the equipment conditions and lining design.
What should be planned when cutting ceramic fibre?
Follow manufacturer safety instructions, control dust and plan fibre containment and retention.
Is ceramic tape self-adhesive?
Do not assume so. Check product construction and the required fastening method.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.