Cerawil Ceramic Fiber Rope with SS Wire
Cerawil Ceramic Fiber Rope reinforced with SS Wire is available in 16, 19, 25, and 32 mm diameters, with a length of 30 m. Density: 500 kg/m³; maximum temperature: 1260°C.
Product description
Cerawil Ceramic Fiber Rope reinforced with SS Wire is available in 16, 19, 25, and 32 mm diameters, with a length of 30 m. Density: 500 kg/m³; maximum temperature: 1260°C.
Product selection and use guide
Cerawil Ceramic Fiber Rope with SS Wire belongs to the ceramic fibre range; its board, blanket, paper or textile form determines how it is used. Rope form is selected for suitable gap or gasket details.
How to choose
Match form, thickness, density where relevant, reinforcement and binder to the lining detail. Request service-temperature data for the exact type rather than copying another brand rating. Measure rope cross-section, run length and required compression; reinforcement depends on the selected type.
Applications to consider
Consider thermal lining, gasket or equipment wrapping details as appropriate to the form and design.
Use limitations
Classification temperature is not automatically continuous service temperature. Follow fibre safety, retention and surface protection instructions; this material alone is not a complete firestop system.
Pre-order checklist
- Include drawings, operating conditions and exact type.
- Confirm thickness, form, reinforcement needs and handling and cutting instructions.
- Confirm diameter, cross-section and gasket groove details.
Frequently asked questions
Do all ceramic fibres have the same service limits?
No. Composition, form, reinforcement and binder may differ; use the selected type data sheet.
Is classification temperature the continuous service temperature?
Do not equate them. Request service recommendations for the equipment conditions and lining design.
What should be planned when cutting ceramic fibre?
Follow manufacturer safety instructions, control dust and plan fibre containment and retention.
Do all ceramic ropes use the same reinforcement?
No. Check the reinforcement and service limitations in the exact product data sheet.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.