Isowool Ceramic Fiber Board for Thermal Insulation
Isowool Ceramic Fiber Board with a density of 300 kg/m³ and sheet dimensions of 600 × 900 mm. Select the temperature class to see available thicknesses.
Product description
Isowool Ceramic Fiber Board with a density of 300 kg/m³ and sheet dimensions of 600 × 900 mm. Select the temperature class to see available thicknesses.
Product selection and use guide
Isowool Ceramic Fiber Board for Thermal Insulation belongs to the ceramic fibre range; its board, blanket, paper or textile form determines how it is used. The board form suits surfaces requiring regular cut pieces.
How to choose
Match form, thickness, density where relevant, reinforcement and binder to the lining detail. Request service-temperature data for the exact type rather than copying another brand rating. Match board dimensions to framing modules and edge details; do not force boards around tight curves.
Applications to consider
Consider thermal lining, gasket or equipment wrapping details as appropriate to the form and design.
Use limitations
Classification temperature is not automatically continuous service temperature. Follow fibre safety, retention and surface protection instructions; this material alone is not a complete firestop system.
Pre-order checklist
- Include drawings, operating conditions and exact type.
- Confirm thickness, form, reinforcement needs and handling and cutting instructions.
- Calculate board quantities from a cutting layout, not net area alone.
Frequently asked questions
Do all ceramic fibres have the same service limits?
No. Composition, form, reinforcement and binder may differ; use the selected type data sheet.
Is classification temperature the continuous service temperature?
Do not equate them. Request service recommendations for the equipment conditions and lining design.
What should be planned when cutting ceramic fibre?
Follow manufacturer safety instructions, control dust and plan fibre containment and retention.
Can board replace blanket?
Not automatically. Rigidity, surface geometry and fixing methods differ; check the assembly details before substituting.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.