Isowool Ceramic Fiber Blanket for Thermal Insulation
Isowool Ceramic Fiber Blanket in 96 and 128 kg/m³ densities. Select the 1260°C or 1430°C class to see its available thicknesses and roll lengths.
Product description
Isowool Ceramic Fiber Blanket in 96 and 128 kg/m³ densities. Select the 1260°C or 1430°C class to see its available thicknesses and roll lengths.
Product selection and use guide
Isowool Ceramic Fiber Blanket for Thermal Insulation belongs to the ceramic fibre range; its board, blanket, paper or textile form determines how it is used. The blanket or roll form covers long runs and follows installation geometry.
How to choose
Match form, thickness, density where relevant, reinforcement and binder to the lining detail. Request service-temperature data for the exact type rather than copying another brand rating. Check roll width and length, installed thickness and fixing spacing; avoid unplanned compression.
Applications to consider
Consider thermal lining, gasket or equipment wrapping details as appropriate to the form and design.
Use limitations
Classification temperature is not automatically continuous service temperature. Follow fibre safety, retention and surface protection instructions; this material alone is not a complete firestop system.
Pre-order checklist
- Include drawings, operating conditions and exact type.
- Confirm thickness, form, reinforcement needs and handling and cutting instructions.
- Plan roll divisions, joints and cutting waste for the installation area.
Frequently asked questions
Do all ceramic fibres have the same service limits?
No. Composition, form, reinforcement and binder may differ; use the selected type data sheet.
Is classification temperature the continuous service temperature?
Do not equate them. Request service recommendations for the equipment conditions and lining design.
What should be planned when cutting ceramic fibre?
Follow manufacturer safety instructions, control dust and plan fibre containment and retention.
Can blanket be compressed into a narrow space?
Do not assume compressed material performs the same. Use the installed thickness specified by the design.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.