Armaflex 520 Insulation Adhesive
Armaflex 520 adhesive for joining elastomeric insulation and bonding it to cleaned metal surfaces. Listed can sizes: 0.5, 1 and 3.78 litres.
Product description
Armaflex 520 adhesive for joining elastomeric insulation and bonding it to cleaned metal surfaces. Listed can sizes: 0.5, 1 and 3.78 litres.
Product selection and use guide
Armaflex 520 Insulation Adhesive is an insulation joint adhesive, not the main tubing or sheet material.
How to choose
Match adhesive to insulation material, substrate and product series. Check application, open time and waiting periods before putting the system into use.
Applications to consider
Use for bonding details listed in the compatible insulation system instructions.
Use limitations
Adhesive does not replace insulation thickness or fill every gap type. Follow safety and ventilation requirements; do not mix with arbitrary solvents.
Pre-order checklist
- Send insulation type, substrate and joint quantities.
- Confirm pack size, consumption, surface preparation and tool-cleaning method.
Frequently asked questions
Does insulation adhesive suit every foam?
No. Check compatibility to avoid damaging the mating material.
Can tape replace adhesive at every joint?
No. Follow the bonding and closure detail required by the system.
When can the bonded joint be put into service?
Follow type-specific open and cure times, accounting for site conditions.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.