Aluminium Sheet for Fabrication and Insulation Jacketing
PT Tali Rejeki sells Aluminium Sheet for fabrication, construction, and insulation covering work. Contact Sales for pricing and a quote based on your needs.
Product description
Aluminium Sheet
Aluminium Sheet Alloy 1100 tersedia dalam berbagai pilihan ketebalan dan ukuran untuk kebutuhan industri, konstruksi, insulasi, dan fabrikasi.
Product selection and use guide
Aluminium Sheet for Fabrication and Insulation Jacketing is an aluminium metal product for fabrication or cladding, not the main insulation layer. Sheet form provides flat stock for fabrication.
How to choose
Choose base thickness, dimensions and surface form for the fabrication pattern. For jacketing, use the finished diameter over insulation and overlap allowances. Match sheet length and width to bending patterns and joint allowances.
Applications to consider
Consider protective insulation skins, gutters or fabricated components as appropriate to the sheet type and drawings.
Use limitations
Metal cladding does not replace the insulation beneath it. Check joints, dissimilar-metal corrosion and support needs; appearance does not establish load capacity.
Pre-order checklist
- Send form, base thickness, dimensions and cutting patterns.
- Plan overlaps, fasteners, compatible sealant and separation of dissimilar metals where required.
- Include cutting patterns, metal thickness and dimensional tolerances.
Frequently asked questions
Is aluminium jacketing the main insulation?
No. Jacketing is a protective skin; insulation material and thickness are specified separately.
Is chequered plate thickness the base thickness?
Confirm the measurement convention. Raised pattern height must not be confused with base sheet thickness.
How is pipe jacketing quantity calculated?
Use the finished insulated diameter, line length, fittings and joint allowances in the fabrication pattern.
Does sheet area equal installed coverage?
Not always. Folds, overlaps and cut-outs can reduce effective coverage.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.