Embossed Aluminium for Insulation Jacketing
PT Tali Rejeki sells Aluminium Emboss for jacketing and insulation protection on pipes or tanks. Contact Sales for pricing and a quote based on your needs.
Product description
Aluminium Emboss Kulit Jeruk
Aluminium Emboss Kulit Jeruk (STE) merupakan lembaran aluminium dengan permukaan bertekstur kulit jeruk yang memiliki karakteristik ringan, kuat, dan tahan terhadap korosi. Material ini banyak digunakan untuk kebutuhan industri, terutama sebagai pelindung permukaan dan aplikasi insulation jacketing pada berbagai material insulasi.
Kegunaan Aluminium Emboss Kulit Jeruk
Insulation Jacketing – digunakan sebagai pelindung material insulasi seperti Rockwool dan Glasswool.
Pelindung Permukaan – membantu melindungi permukaan material dari lingkungan luar dan kondisi operasional.
Perpipaan – dapat digunakan sebagai pelapis atau pelindung pada sistem perpipaan yang menggunakan insulasi.
Ducting – digunakan sebagai pelindung pada ducting dan sistem saluran udara yang membutuhkan lapisan pelindung.
Tangki dan Peralatan Industri – dapat diaplikasikan sebagai pelindung permukaan pada tangki serta berbagai peralatan industri.
Kelebihan Aluminium Emboss Kulit Jeruk
Permukaan embossed memberikan tampilan yang rapi dan khas.
Ringan sehingga mudah dalam proses penanganan dan pemasangan.
Memiliki ketahanan terhadap korosi.
Cocok digunakan untuk kebutuhan jacketing dan perlindungan material insulasi.
Tersedia dalam berbagai pilihan ukuran dan ketebalan untuk menyesuaikan kebutuhan aplikasi.
Tali Rejeki menyediakan Aluminium Emboss Kulit Jeruk dalam berbagai pilihan ukuran dan ketebalan untuk memenuhi kebutuhan proyek, industri, perpipaan, ducting, tangki, serta aplikasi insulation jacketing lainnya.
Product selection and use guide
Embossed Aluminium for Insulation Jacketing is an aluminium metal product for fabrication or cladding, not the main insulation layer. An embossed texture distinguishes the surface from plain aluminium.
How to choose
Choose base thickness, dimensions and surface form for the fabrication pattern. For jacketing, use the finished diameter over insulation and overlap allowances. Check base thickness and texture direction against jacketing details.
Applications to consider
Consider protective insulation skins, gutters or fabricated components as appropriate to the sheet type and drawings.
Use limitations
Metal cladding does not replace the insulation beneath it. Check joints, dissimilar-metal corrosion and support needs; appearance does not establish load capacity.
Pre-order checklist
- Send form, base thickness, dimensions and cutting patterns.
- Plan overlaps, fasteners, compatible sealant and separation of dissimilar metals where required.
- Confirm texture, dimensions and joint allowances.
Frequently asked questions
Is aluminium jacketing the main insulation?
No. Jacketing is a protective skin; insulation material and thickness are specified separately.
Is chequered plate thickness the base thickness?
Confirm the measurement convention. Raised pattern height must not be confused with base sheet thickness.
How is pipe jacketing quantity calculated?
Use the finished insulated diameter, line length, fittings and joint allowances in the fabrication pattern.
Does embossing add insulation thickness?
No. It is a metal skin texture, not a substitute for the insulation beneath it.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.