Aluminium Coil for Gutters and Insulation Jacketing
PT Tali Rejeki sells Aluminium Coil for jacketing and outer insulation protection. Contact Sales for pricing and a quote based on your needs.
Product description
Aluminium Coil
Aluminium Coil Alloy 1100 & 3003 tersedia dalam pilihan ketebalan dan ukuran yang sesuai untuk berbagai kebutuhan industri, terutama aplikasi jacketing dan perlindungan insulasi.
Catatan: Ketersediaan ukuran dan ketebalan dapat menyesuaikan stok.
Product selection and use guide
Aluminium Coil for Gutters and Insulation Jacketing is an aluminium metal product for fabrication or cladding, not the main insulation layer. Coil or roll form is fabrication stock that must be uncoiled and cut.
How to choose
Choose base thickness, dimensions and surface form for the fabrication pattern. For jacketing, use the finished diameter over insulation and overlap allowances. Check coil width, thickness and cutting equipment capacity before defining working lengths.
Applications to consider
Consider protective insulation skins, gutters or fabricated components as appropriate to the sheet type and drawings.
Use limitations
Metal cladding does not replace the insulation beneath it. Check joints, dissimilar-metal corrosion and support needs; appearance does not establish load capacity.
Pre-order checklist
- Send form, base thickness, dimensions and cutting patterns.
- Plan overlaps, fasteners, compatible sealant and separation of dissimilar metals where required.
- Confirm ordering units, required weight or length and coil handling facilities.
Frequently asked questions
Is aluminium jacketing the main insulation?
No. Jacketing is a protective skin; insulation material and thickness are specified separately.
Is chequered plate thickness the base thickness?
Confirm the measurement convention. Raised pattern height must not be confused with base sheet thickness.
How is pipe jacketing quantity calculated?
Use the finished insulated diameter, line length, fittings and joint allowances in the fabrication pattern.
Is coil ordered like sheet?
Confirm the units. Length, weight and cut-piece sizes must not be treated as identical.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.