Aluminium Chequered Plate
PT Tali Rejeki sells Aluminium Bordes for fabrication and construction work requiring patterned metal plates. Contact Sales for pricing and a quote based on your needs.
Product description
Aluminium Bordes
Aluminium Bordes merupakan plat aluminium dengan permukaan berpola yang memberikan daya cengkeram lebih baik. Material ini memiliki karakteristik ringan, kuat, dan tahan terhadap korosi sehingga cocok digunakan untuk berbagai kebutuhan industri, konstruksi, fabrikasi, maupun area yang membutuhkan permukaan dengan daya cengkeram lebih baik.
Kelebihan Aluminium Bordes
Ringan namun tetap kuat untuk berbagai kebutuhan aplikasi.
Permukaan berpola memberikan daya cengkeram yang lebih baik.
Tahan terhadap korosi dan berbagai kondisi lingkungan.
Mudah dipotong, dibentuk, dan diaplikasikan sesuai kebutuhan.
Cocok digunakan untuk berbagai kebutuhan industri dan konstruksi.
Kegunaan Aluminium Bordes
Lantai dan Platform – digunakan untuk area kerja, walkway, platform, dan lantai industri.
Tangga dan Ramp – digunakan sebagai permukaan tangga atau ramp yang membutuhkan daya cengkeram lebih baik.
Industri dan Konstruksi – digunakan untuk berbagai kebutuhan fabrikasi, konstruksi, dan proyek industri.
Area Kerja – dapat digunakan pada area yang membutuhkan material ringan dengan permukaan berpola.
Tali Rejeki menyediakan Aluminium Bordes dalam berbagai pilihan ukuran dan ketebalan untuk memenuhi kebutuhan industri, konstruksi, fabrikasi, dan berbagai kebutuhan proyek lainnya.
Product selection and use guide
Aluminium Chequered Plate is an aluminium metal product for fabrication or cladding, not the main insulation layer. Chequered plate has a raised pattern unlike flat sheet.
How to choose
Choose base thickness, dimensions and surface form for the fabrication pattern. For jacketing, use the finished diameter over insulation and overlap allowances. Distinguish base thickness from pattern height; floor use needs a span and load check.
Applications to consider
Consider protective insulation skins, gutters or fabricated components as appropriate to the sheet type and drawings.
Use limitations
Metal cladding does not replace the insulation beneath it. Check joints, dissimilar-metal corrosion and support needs; appearance does not establish load capacity.
Pre-order checklist
- Send form, base thickness, dimensions and cutting patterns.
- Plan overlaps, fasteners, compatible sealant and separation of dissimilar metals where required.
- Specify the raised pattern, base thickness and support layout.
Frequently asked questions
Is aluminium jacketing the main insulation?
No. Jacketing is a protective skin; insulation material and thickness are specified separately.
Is chequered plate thickness the base thickness?
Confirm the measurement convention. Raised pattern height must not be confused with base sheet thickness.
How is pipe jacketing quantity calculated?
Use the finished insulated diameter, line length, fittings and joint allowances in the fabrication pattern.
Does a chequered pattern guarantee suitability for any floor?
No. Loads, surface conditions and supports still require design evaluation.
This guide supplements the original description; it does not replace technical data sheets or project design. Match the type and dimensions to the product specifications and obtain written confirmation for special requirements.